Fornitore di materiale professionale in grafite, grafite per EV, grasso, fornace e qualsiasi altra industria.
(Come scegliere la batteria al litio?)
Le batterie agli ioni di litio si dividono in batterie agli ioni di litio liquidi e batterie agli ioni di litio polimeriche. L'elettrolito delle batterie agli ioni di litio è fluido, quindi sono più instabili delle batterie ai polimeri di litio, and they may explode if they are beaten by external forces or use substandard chargers. Many portable electronic products such as mobile phones and laptops use lithium batteries. In altre parole, many people have a "bomb" by their side. You must pay attention to the following points for safety reasons when purchasing.
1. Is there a clear indication of the capacity? Batteries that do not have a marked capacity (e.g. 1000mAh or 1000mAh) are likely to be of poor quality or recycled. Many cheap batteries on the market are made of recycled battery cores. Although the price is low, the lifespan is short, and the quality is unstable. Careless use may damage the phone.
2. There is no guaranteed standby time. Standby time refers to the continuous use time after the battery is installed in the mobile phone to the subsequent charging. Generalmente, the batteries sold on the market cannot guarantee the standby time for customers. This is because the quality of the batteries is unstable. Many cheap batteries use poor quality battery cores, so the standby time is short.
3. Whether to install a safety protection circuit board. Without a protective circuit board, the lithium battery is at risk of deformation, leakage and explosion. Under the vicious price-cutting competition, various companies seek lower-priced protection circuit boards or omit this device, making the market full of lithium batteries with a danger of explosion. Consumers cannot tell whether there is a protective circuit board from the appearance, so it is best to choose a reputable merchant to buy.
On January 19, 2022, The Ministry of Industry and Information Technology will guide relevant units to speed up the formulation of lithium battery coding standards.
Lithium primary battery
manganese dioxide
With metal lithium as the negative electrode and heat-treated manganese dioxide as the positive electrode, the separator is made of PP or PE film. The cylindrical battery is the same as the lithium ion battery separator. The electrolyte is an organic solution of lithium perchlorate, cylindrical or a button type. . The battery needs to be produced in a dry environment with a humidity of ≤1%.
Caratteristiche: basso tasso di autoscarica, annual self-discharge can be ≤ 1%, fully sealed (metal welding, laser seal) battery can meet ten years of life, the semi-sealed battery is generally five years, if the work control is not reasonable, it can not reach this life. Yiwei, which has done an excellent job developing cylindrical lithium-manganese batteries, has realized automatic production. The battery can be tested for short-circuit and over-discharge without explosion.
Generalmente, there is a button-type lithium battery on the motherboard of a desktop computer, which provides a weak current and can be used generally for about three years. Some hotels also use lithium-manganese dioxide batteries for access control cards, instruments, ecc., which are used year by year decline.
Thionyl chloride
With metal lithium as the negative electrode, the positive electrode and the electrolyte are thionyl chloride (thionyl chloride), the cylindrical battery has electricity after assembly, and the voltage is 3.6V. qualità) battery with the highest capacity. It is suitable for electronic instruments and equipment that cannot be maintained frequently and provides good current.
Other lithium batteries include lithium-ferrous sulfide batteries, lithium-sulfur oxide batteries, ecc.
High-quality lithium batteries supplier
Luna di zenzero & Stella New Energy Technology Co., LTD, fondata nel mese di ottobre 17, 2008, is a high-tech enterprise committed to research, development, produzione, elaborazione, sales, and technical services of lithium ion battery anode materials. Dopo più di dieci anni di sviluppo, l'azienda si è progressivamente sviluppata in una struttura di prodotti diversificata con grafite naturale, grafite artificiale, grafite composita, fase intermedia e altri materiali nocivi (materiali silicio-carbonio, ecc.). The products are widely used in high-end lithium ion digital power and energy storage batteries. Se stai cercando materiale per l'anodo della batteria al litio, clicca sui prodotti necessari e inviaci una richiesta:sales@graphite-corp.com
.
(Come scegliere la batteria al litio?)



























































































