Propesyonal na tagapagtustos ng materyal na grapayt, grapayt para sa EV, mantika, pugon at anumang iba pang industriya.
MGA PARAMETER NG PRODUKTO
Paglalarawan
Carbon nanotubes (multi-walled carbon nanotubes) are graphite sheets
composed of a layer of carbon atoms rolled into a seamless, hollow tube
at a certain angle.
(Multi-walled carbon nano-tubes)
Features of multi-walled carbon nanotubes :
Carbon
nanotubes (multi-walled carbon nanotubes) are graphite sheets composed
of a layer of carbon atoms rolled into a seamless, hollow tube at a
certain angle. Carbon nanotubes are another allotrope of carbon
discovered after C60. Its radial size is small. The outer diameter of
the tube is generally from a few nanometers to tens of nanometers, at
the inner diameter of the tube is lower, and some are only about 1nm;
Its length is generally in the micron level, and the ratio of height to
diameter is huge, reaching 103 sa 106. Samakatuwid, carbon nanotubes are
considered to be a typical one-dimensional nanomaterial.
Application of multi-walled carbon nanotubes:
Carbon
nanotubes may become a new type of high-strength carbon fiber material,
which not only has the inherent nature of carbon materials. It also has
the electrical and thermal conductivity of metal materials, the heat
and corrosion resistance of ceramic materials, and the wearability of
textile fibers. And the lightweight and secure processing of polymer
materials. Using carbon nanotubes as a composite material reinforcement
is expected to exhibit good strength, elasticity, fatigue resistance,
and isotropy. It can be assumed that carbon nanotube reinforced
composite materials may bring a leap in composite performance. Ang
research on using nanotubes to make composite materials was first
carried out on metal substrates, such as Fe/carbon nanotubes, Al/carbon
nanotubes, Ni/carbon nanotubes, Cu/carbon nanotubes, atbp. The research
focus of carbon nanotube composite materials has shifted to
polymer/carbon nanotube composite materials. Halimbawa, in a
lightweight and high-strength materials, carbon fiber is used as a
reinforcing material. The mechanical properties of carbon nanotubes and
their small diameter and large The aspect ratio will bring better
enhancement effect.
(Multi-walled carbon nano-tubes)
Technical Dataof multi-walled carbon nanotubes:
| 性质 |
单位unit |
石墨化多壁碳纳米管(GMWCNTs) | 表征方法 | ||
| TNGM2 | TNGMH2 | TNGMC2 | |||
| OD | nm | 8-15 | 8-15 | 8-15 | HRTEM,Raman |
| 纯度(Purity) | wt% | >99.9 | >99.9 | >99.9 | TGA & TEM |
| 长度(Length) | microns | 10-50 | 10-50 | 10-50 | TEM |
| SSA | m2/g | >90 | >117 | >117 | BET |
| 灰分(ASH) | wt% | <0.1 | <0.1 | <0.1 | TGA |
| 堆密度(Tap Density) | g/cm3 | ||||
| Ig/Id | — | — | — | — | Raman |
| -OH 含量 | wt% | 1.85 | XPS & Titration | ||
| -COOH 含量 | wt% | 1.28 | XPS & Titration | ||
|
OD=外径(Outer Diameter) SSA=比表面积(Special Surface Area) |
|||||
HUMILING NG QUOTE
MGA KAUGNAY NA PRODUKTO
Shaft Tube Carbon Fiber Large Diameter 3k Black Maxi Tech Wall Plain Light Customizable Surface Dimensions Color Feature
Nanoscale 98% high purity multi-wall carbon nanotubes CNT material s direct s
3k twill full carbon fiber tubing , carbon pipe cuttlefish carbon barrel tube
High-quality carbon nanotubes Highly thermally conductive carbon nanotubes
Small coefficient of thermal expansion 31mm carbon fiber tube 120mm carbon fiber tubing 15 mm






















































































