5nm-11nm tube diameter Carbon Nanotube for ABS plastic additive

The diameter of carbon nanotubes (CNTs) used in ABS plastic additive can be specified based on the specific requirements of the application. Here are some common considerations:

(5nm-11nm tube diameter Carbon Nanotube for ABS plastic additive)

Overview of 5nm-11nm tube diameter Carbon Nanotube for ABS plastic additive

Li-nanotube tsa carbon (CNTs) ke li-nanostructures tsa cylindrical tse nang le letlapa le le leng la graphene e phuthoang, lesela la mahlakore a mabeli la liathomo tsa carbon. E fumanoe ka 1991, Li-CNT li bonts'a thepa e makatsang ka lebaka la sebopeho sa tsona se ikhethang sa limolek'hule, ho etsa hore e be e 'ngoe ea lisebelisoa tse tšepisang ka ho fetisisa ho nanotechnology. Li ka ba lerako le le leng (SWCNTs) kapa e nang le mabota a mangata (MWCNTs), e fapaneng ka palo ea likarolo tsa carbon tse concentric.

Features of 5nm-11nm tube diameter Carbon Nanotube for ABS plastic additive

Matla a Ikhethang le ho satalla: CNTs ke tse ling tsa lisebelisoa tse matla le tse thata ka ho fetisisa tse tsejoang, e nang le matla a thata ho fihlela 60 makhetlo a fetang tšepe.

E bobebe: Ho sa tsotellehe matla a bona, Li-CNTs li bobebe haholo, e teteaneng e haufi le ya graphite.

High Thermal le Motlakase Conductivity: Li ka tsamaisa mocheso le motlakase ho feta koporo, silevera, kapa kgauta, ka lielektrone tse phallang ka bolokolohi ka bolelele ba tube.

Inert ea lik'hemik'hale: CNTs e hanyetsana haholo le liphetoho tsa lik'hemik'hale le ho bola, ho boloka thepa ea bona maemong a thata.

Ho tenyetseha: Li ka kobeha kapa tsa sotheha ntle le ho robeha, ho bonahatsa ho tenyetseha ha maemo ho ipapisitse le matla a bona.

Sebaka se Seholo sa Sebaka: Li-CNT li na le sebaka se phahameng ka mokhoa o makatsang ho isa tekanyong ea molumo, ho ntlafatsa ts'ebetso ea bona ho adsorption le ts'ebeliso ea matla.

(5nm-11nm tube diameter Carbon Nanotube for ABS plastic additive)

Parameter of 5nm-11nm tube diameter Carbon Nanotube for ABS plastic additive

The diameter of carbon nanotubes (CNTs) used in ABS plastic additive can be specified based on the specific requirements of the application. Here are some common considerations:

1. Boholo: The diameter of a nanotube typically ranges from about 20 ho 40 microns, depending on the application and intended usage.
2. Matla: Carbon nanotubes with larger diameters may have stronger mechanical properties than those with smaller diameters.
3. Efficiency:Carbon nanotubes have better conductivity and thermal stability than conventional matrices such as polypropylene or urethane. This can lead to increased efficiency inABS plastics by reducing heat dissipation and increasing the amount of energy available to perform function.
4. Compatibility: nanotubes are typically compatible with ABS plastics because they do not provide any additional advantages over other matrix materials such as polyurethane.
5. Cost: The cost of carbon nanotubes is higher compared to traditional matrix materials due to their complexity and processing steps.

It’s important to consider these factors when selecting a diameter for a carbon nanotube in ABS plastic additive applications. The choice will depend on the specific requirements of the application and your budget.

(5nm-11nm tube diameter Carbon Nanotube for ABS plastic additive)

Applications of 5nm-11nm tube diameter Carbon Nanotube for ABS plastic additive

Tsa elektroniki: E sebelisoa ka li-transistors, lisensara, le lipontšo ka lebaka la conductivity ea tsona e phahameng le boholo bo bonyenyane, e ka bang le phetoho ea miniaturization ea elektroniki.

Lisebelisoa tse Kopantsoeng: E kopantsoe le li-polymers ho etsa boima bo bobebe, metsoako e matla bakeng sa sefofane, koloi, le thepa ea lipapali.

Polokelo ea Matla: Ka libeteri le li-supercapacitor, Li-CNTs li ntlafatsa bokhoni ba ho boloka matla le litefiso tsa ho tjhaja / ho lahla.

Bongaka ba bophelo: E le likoloi tse tsamaisang lithethefatsi, li-scaffolds tsa boenjiniere ba lisele, le ho li-sensor tsa biomedical ka lebaka la biocompatibility ea tsona le thepa e ikhethang ea lipalangoang.

Li-catalysts: Sebaka sa bona se seholo se etsa hore li-CNTs li be le litšehetso tse sebetsang hantle le li-catalyst ka botsona ka karabelo e fapaneng ea lik'hemik'hale..

Tokiso ea Tikoloho: E sebelisoa bakeng sa tlhoekiso ea metsi le tlhoekiso ea moea ka lebaka la thepa ea tsona e khahlang bakeng sa litšila.

Boemo ba Khoebo

Graphite-Corp ke morekisi ea tšepahalang oa thepa ea lik'hemik'hale lefatšeng ka bophara & moetsi ea nang le boiphihlelo bo fetang lilemo tse 12 ho fana ka phofo ea boleng bo holimo ea graphite le lihlahisoa tsa graphene.

Khampani e na le lefapha la litsebi tsa theknoloji le Lefapha la Tlhokomelo ea Boleng, laboratori e nang le lisebelisoa hantle, hape e na le lisebelisoa tse tsoetseng pele tsa tlhahlobo le setsi sa litšebeletso tsa bareki ka mor'a thekiso.

Haeba u batla phofo ea boleng bo holimo ea graphite le lihlahisoa tse amanang, ka kopo ikutloe u lokolohile ho ikopanya le rona kapa tobetsa lihlahisoa tse hlokahalang ho romella lipatlisiso.

Mekhoa ea Tefo

L/C, T/T, phetiso ea chelete e bitsoang western union, Paypal, Credit Card etc.

Thomello

E ne e ka tsamaisoa ka sekepe, ka moea, kapa ka ho senola ASAP hang feela ha resiti ea tefo.

FAQs of 5nm-11nm tube diameter Carbon Nanotube for ABS plastic additive

Q: Is 5nm-11nm tube diameter Carbon Nanotube for ABS plastic additive safe for human health and the environment?
A: Matšoenyeho a hlahisitsoe ka chefo e ka bang teng ea CNTs, haholo-holo mefuta ea tsona e phefumolohang, e ka 'nang ea tšoana le likhoele tsa asbestos. Lipatlisiso li ntse li tsoela pele ho theha mekhoa e sireletsehileng ea ho tšoara le ho hlahloba liphello tsa nako e telele tsa tikoloho.

Q: How is 5nm-11nm tube diameter Carbon Nanotube for ABS plastic additive produced?
A: Ho na le mekhoa e 'maloa ea ho hlahisa CNTs, ho kenyelletsa ho tsoa ha arc, ho tlosoa ha laser, le ho beha mouoane oa lik'hemik'hale (CVD), ka CVD e leng eona e atileng haholo bakeng sa tlhahiso ea maemo a indasteri.

Q: Can 5nm-11nm tube diameter Carbon Nanotube for ABS plastic additive be seen with the naked eye?
A: Che, ka lebaka la boholo ba bona ba nanoscale (ka tlwaelo 1-100 nanometers ka bophara), Li-CNT ha li bonahale ka mahlo 'me li hloka microscope ea elektronike bakeng sa pono.

Q: Is 5nm-11nm tube diameter Carbon Nanotube for ABS plastic additive expensive?
A: Ho latela nalane, Li-CNT li ne li theko e boima haholo ka lebaka la mekhoa e rarahaneng ea ho kopanya. Leha ho le joalo, tsoelo-pele mekhoeng ea tlhahiso e theotse litšenyehelo, le hoja li lula li theko e boima ho feta lisebelisoa tse ngata tse tloaelehileng.

Q: How does 5nm-11nm tube diameter Carbon Nanotube for ABS plastic additive compare to graphene?
A: Ka bobeli ke mefuta ea carbon e nang le thepa e ikhethang, empa graphene ke letlapa le bataletseng ha CNTs e le li-tubes. Graphene e fana ka conductivity e phahameng ea sefofaneng, ha li-CNTs li ipabola ka ntle ho sefofane 'me li na le melemo e meng ea mochini ka lebaka la sebopeho sa tsona sa tubula..

(5nm-11nm tube diameter Carbon Nanotube for ABS plastic additive)

(5nm-11nm tube diameter Carbon Nanotube for ABS plastic additive)